Glass Stair Railings

Frameless glass stair railings that open up your staircase and bring in light — without the visual clutter of traditional balusters. We design, fabricate, and install custom interior and exterior glass stair railing systems for homes and commercial properties across Boca Raton and South Florida, engineered for coastal conditions and Florida Building Code requirements.

Get a Free Stair Railing Quote

Systems We Install

Each of these holds the same glass a different way — the full comparison is in our guide to glass railing systems.

Frameless (Spigot-Mounted)

Glass panels anchored from below with stainless spigots. The most open look — no posts, no top rail, uninterrupted sightlines up the staircase.

Standoff-Mounted

Panels fixed to the side of the stringer with stainless standoffs. Saves tread width and gives a clean floating effect along the stairs.

Post-Mounted with Handrail

Slim stainless posts with glass infill and a continuous handrail. The most cost-effective option and the easiest to meet grip-rail requirements.

Built to Florida Building Code

Stair railings are a safety system first. Florida’s building code sets specific requirements for guard height, handrail graspability, opening limits, and load resistance — and coastal properties face additional wind and corrosion considerations. Every system we install is designed to meet the requirements that apply to your property, and we confirm local specifics with your municipality before fabrication. An indoor glass railing and an outdoor stair run start from the same code baseline; the exterior one adds wind load and salt exposure on top of it, which changes the hardware spec and sometimes the glass itself.

Guard height and opening limits per the Florida Building Code
Load-resistance requirements for residential and commercial stairs
Graspable handrail where code requires it
Marine-grade hardware rated for coastal exposure
HVHZ considerations for Broward and Miami-Dade projects
Permit and inspection requirements confirmed before we build

Glass Stair Railing Examples

Glass, Hardware & Finishes

All panels are tempered safety glass, cut to the exact rise and run of your staircase. Tempered glass is significantly stronger than standard glass and is designed to break into small blunt pieces rather than sharp shards. Clear, low-iron (ultra-clear), and frosted options are available depending on the look you want.

Spigots, standoffs, clamps, and fasteners in marine-grade stainless steel — chosen specifically because standard hardware corrodes quickly this close to the Atlantic. Available in brushed and polished finishes.

Continuous stainless handrails in round or square profile, wall-mounted or glass-mounted. We can also install a slimline top cap on frameless systems where a graspable rail is required.

Brushed stainless, polished stainless, matte black, and powder-coated finishes to match your interior. Hardware finish can be matched across stairs, balconies, and pool areas for a consistent look throughout the property.

Glass Stair Railing Installation Across Boca Raton & South Florida

Safe Railing is a railing contractor based in Boca Raton. We design, fabricate, and install custom glass stair railing systems for homes, condos, and commercial properties throughout South Florida — interior glass railing systems for staircases, landings and mezzanines, and outdoor stair railings for entry steps and exterior runs. Whether you’re replacing dated wood or wrought-iron balusters on an existing staircase or specifying railings for new construction, each system is templated to your exact stairs — no stock panels, no approximations.
Every project starts with a free on-site consultation by appointment. We measure your stringer, treads, and landing angles, recommend the system that fits your staircase and budget, and build to Florida Building Code guard height, handrail, and load requirements — with marine-grade stainless hardware selected for coastal conditions.
We install glass stair railings in Boca Raton, West Palm Beach, Pompano Beach, Delray Beach, Deerfield Beach, Boynton Beach, Fort Lauderdale, and surrounding communities across Palm Beach and Broward counties.

Working on more than a staircase? We also install glass balcony railings, glass pool fences, and pool railings and handrails across South Florida.

Why a Glass Staircase Is a Measuring Job First

Tempered glass cannot be cut, drilled or trimmed once it has been through the oven. Every hole, notch and polished edge is made before toughening, so a panel that comes out a few millimetres off is scrap rather than something to adjust on site. That is why the measuring visit is separate from the install, and why we template the actual staircase instead of working from the builder’s drawing.

It is also the reason this is not a handyman job. If you are comparing staircase railing installers, ask how they measure: a template taken on the stair, or figures off a plan. Stair and railing contractors who template get panels that fit on the first visit; the ones working from a plan come back with a second set. On a winder or a curved flight that stops being a small difference.

Outdoor stairs are a different conversation. An exterior flight in South Florida takes salt, sun and wind load, so glass there is normally paired with powder-coated aluminum posts rather than standoffs set into a painted stringer. We install outdoor stair railings too, and where a job has both an inside and an outside flight they get measured in the same visit — the aluminum railing page covers what holds up outside.

Glass Stair Railing FAQ

Pricing depends on the length of your staircase, the system you choose, glass thickness, and hardware finish. Frameless systems cost more than post-mounted; a straight run costs less than stairs with landings and turns. We give you an exact, upfront quote after a free on-site measurement. For typical South Florida price ranges, see our glass railing cost guide.

Yes — most of our stair projects are replacements. We remove the old balusters, assess the substrate for anchoring, and template the glass to your existing treads and stringer. If the structure needs reinforcement to hold the new system properly, we’ll tell you before quoting. An indoor stair railing replacement and an exterior one follow the same process — only the hardware spec changes.

Yes. Tempered safety glass is far stronger than standard glass and is designed to break into small blunt pieces rather than sharp shards. Panels are installed to code with restricted openings, and the smooth surface actually gives children less to climb than traditional balusters.

In most cases yes — code generally requires a graspable handrail on stairs. We integrate a stainless handrail into the system, either glass-mounted or wall-mounted, so it meets the requirement without spoiling the frameless look.

Fabrication takes the bulk of the timeline since each panel is cut to your stairs. The installation itself is usually completed in a single visit for a typical residential staircase, with floors and finishes protected throughout.

Make An Appointment

Ready to Upgrade Your Staircase?

Tell us about your staircase — we’ll schedule a free on-site measurement and get back to you with an upfront quote.

Every day

9:00 AM – 8:00 PM

Call us directly